GDS-810S Digital Storage Oscilloscope
 

Back to Index


   
GDS-806C
               front view

             
                   rear view  

                 Click Image to Enlarge

                               MSRP $1040

  • 100MHz Bandwidth With MONO Display
     

  • 125k Memory and 12 Division Horizontal Display
     

  • 25GS/s Sampling Rate for Repetitive Waveforms
     

  • Advanced Trigger : Pulse Width , TV Line, Event Delay and Time Delay
     

  • Go/NoGo , Auto Setup Sequence and TTF Function
     

  • Built-In Help Menu, Multi-Language and  FREE PC Software
     

  • Standard Interface: RS-232C
     

  • Optional Interface: GPIB, Printer Port and USB 2.0

                      

 Datasheet  User Manual Programmer Manual

 

Specifications

Applications

Options

Software

      
           
     Display System     Display Device   Mono (320 x 240) , 5.7" LCD    
      Display Contrast   Adjustable    
      Waveform Display  Graticule 8 x 10 divisions (8 x 12 when menu off)  
      Display Mode Dot , Vector , Accumulate  
 
     Vertical System     Bandwidth   100MHz    
      Channels      2    
      Vertical Resolution   8-bit    
      Vertical Sensitivity   2mV/div ~ 5V/div    
      Vertical Accuracy   ±3%    
      Rise Time   <3.5ns    
      Input Coupling   AC , DC , Ground    
      Input Impedance   1MΩ ± 2% , ~18pF    
      Polarity   Normal and Invert    
      Max. Voltage Between Signal & 300V ( DC+AC peak ) , CATII    
      common at Input BNC        
      Waveform Signal Process CH1 + CH2 , CH1 - CH2 , FFT  
      Offset Range   2mV/div~50mV/div : ± 0.5V; 100mV/div~500mV/div : 1V/div~5V/div : ±50V
      BW Limit   20MHz ( -3dB )    
     Horizontal System     Time Base Range   1ns/div ~ 10s/div ( 1-2-5 increments ), Roll : 250ms/div ~ 10s/div
      Time Base Mode   Main , Window , Window Zoom , Roll , X-Y  
      Time Base Accuracy   ± 0.01%    
      Delay Range   Pre-trigger : 20 div  
     Signal Acquisition     Real-Time Sample Rate 100MS/s maximum on each channel  
     System     Equivalent Sample Rate   25GS/s E.T. maximum on each channel  
      Record Length   125h/CH    
      Peak Detection   10ns (500ns/div ~ 10s/div)  
      Acquisition Mode Sample , Peak Detect , Average  
      Average   2 , 4 , 8 , 16 , 32 , 64 , 128 , 256  
     Trigger     Trigger Source   CH1 , CH2 , Line , Ext  
      Mode   Auto Level , Auto , Normal , Single , TV , Time Delay , Event Delay , Edge ,
        Pulse Width , AC , DC , HF , LF , Noise Reject
      Coupling   AC , DC , HF , LF , Noise Reject  
      Sensitivity   DC ~ 25MHz : Approximate 0.5div or 5mV
      25MHz ~ 100MHz : Approximate 1.5div or 15mV  
     X - Y Mode     X-Axis Input / Y-Axis Input Channel 1 / Channel 2
      Phase Shift   ± 3° at 100 kHz    
     Cursor and     Auto Voltage Measurement Vpp , Vamp , Vavg , Vrms , Vhi , Vlo , Vmax , Vmin
     Measurement     Auto Time Measurement Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width,
      Duty Cycle
      Cursor Measurement   Voltage difference between cursors (∆V), Time difference between
      cursors (∆T), Frequency difference between cursors (1/∆T)
     Frequency Counter     Readout Resolution   6 digits    
      Frequency Range   AC Coupled , 20Hz~rated bandwidth ; resolution: 10Hz
      Signal Source   All available trigger source except the Pulse Width & Video Trigger mode  
     Adjustable Probe     Frequency Rang   1 kHz ~ 100 kHz   1KHz / STEP  
     Calibration Signal     Duty Cycle   5% ~ 95%    5% / STEP  
     External Trigger     Range       ± 15V    
      Sensitivity   DC ~ 25MHz : ~ 50mV ; 25 ~ 100MHz : ~ 100mV
      Input Impedance   1MΩ ± 2%, ~ 18pF  
      Maximum Input   300V ( DC + AC peak ) , CATII  
    Control Panel Function     AutoSet   "Autoset" can adjust vertical ( Volt/div ), Horizontal ( Sec/div) and Trigger  
       level automatically  
      Save/Recall   Up to 15 sets of measurement conditions can be saved and recalled  
      Waveform Trace Save/Recall 2 sets of waveform can be saved and recalled  
 
     Interface     Standard   RS-232C      
      Optional Opt. 01   GPIB Interface      
      Optional Opt. 11   USB, Printer Port, Go/NoGo Output  
 
     Power Source     100V ~ 240V  AC  47Hz ~ 63Hz , Auto selection  
 
     Accessories     Instruction Manual x 1 , Power Cord x 1 , Probe x 2  
 
     Dimensions and Weights   310W x 142H x 254D (mm) , Approximate 4.1 kg  

    Back to Index